- Keep water and moisture out of your tank and air lines
- Made from industrial grade material for superior durability
- Designed to meet and exceed quality standards
- Performance part for perfect fit and function
- Easy to install
- Perfect fit for Viair 1/4" NPT Leader Hose Compressors as well as for Air Lift 3P & 3H self - leveling kits
Note:
Make Sure water trap is installed with air inlet & outlet arrows
in proper direction. Simply Screw the push to connect fitting at bottom
knob & then connect airline. These can be mounted away, higher
than air tank with Air Lift 3P & 3H kits.
Auto Drain Water Trap Working/Functionality:
When
pressure inside the bowl is released:
Even when
pressure inside the bowl (1) is released, the weight of the float (2) causes
valve (4), which is connected to lever (3), to seal valve seat (5). As a
result, the inside of the bowl (1) is shut off from the outside air. Therefore,
even if there is an accumulation of condensate in the bowl (1), it will not
drain out.
When
pressure is applied inside the bowl:
Even when
pressure is applied inside the bowl (1), the weight of the float (2) and the
differential
Pressure
that is applied to valve (4) causes valve (4) to seal valve seat (5), and the
outside air is shut off from the inside of the bowl (1).
When
the drain is accumulated in the bowl:
Float (2)
rises due to its own buoyancy and the seal at valve seat (5) is interrupted.
The
condensate inside the bowl (1) drains out through the knob (6).
Turning knob
(6) manually counterclockwise lowers it and causes the sealing action of valve seat
(5) to be interrupted, which allows the condensate to drain out.
WARNING: This product can expose you to chemicals
including lead, which is known to the State of California to cause
cancer and birth defects or other reproductive harm. For more
information, go to www.P65Warnings.ca.gov.