 |
Viair 20007 Fast-Fill 200 PSI Air Source Kits come with a powerful, low amp-draw
380C VIAIR compressor mounted on a 200 PSI-rated 2.0 gallon air tank
with 5 ports. All 200 PSI Air Source kits come with a pre-wired 165/200
PSI pressure switch. Both kits not only come with the industry’s leading
200 PSI compressors but also come with a drain cock, safety valve,
1/2-inch port compression fitting for 3/8" (I.D.) air line
pre-installed! To use, simply connect the pressure switch to fused
power, make a solid ground and connect an air line to the compression
fitting. A 40-amp relay and an appropriately-rated fuse is recommended
for use with this unit
The coil hose with blow-off gun is not included with this kit, sold separately
Features
- 380C Pewter Air Compressor
- 2.0 Gallon Tank
- 1165/200 PSI sealed Pressure Switch (165 ON, 200 OFF)
- 250 PSI Safety Valve
- Drain Cock
- Stainless Steel Braided Hose With In-built Check Valve
Specifications
- 12V DC
- Permanent Magnetic Motor
- Duty Cycle 100% @100 PSI (55% @200 PSI)
- Max Pressure :200 PSI
- Max AMP Draw : 23
- Ingress Protection Rating : IP54
- Dimensions 19"L X 5.9"W X 14.2"H
Fill Rates
Click Here to Download User Manual
Click Here For Dimensional Drawing
WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
|
|
|
Air tank and compressor 
